杨静

    杨静，女，博士，浙江工业大学，讲师。2011年7月毕业于哈尔滨工业大学材料学院材料成型及控制工程专业，获学士学位；2013年7月毕业于哈尔滨工业大学材料学院材料加工专业，获硕士学位；2018年5月毕业于新加坡南洋理工大学机械与航空学院制造专业，获博士学位；2018年6月，进入浙江工业大学工作。主要围绕材料表面力学、摩擦磨损理论及流体润滑理论开展研究。参与多项科研项目，在《International Journal of Mechanical Sciences》、《Acta Mechanica》、《International Journal of Applied Mechanics》、《Journal of Engineering Tribology》、《Advances in mechanical engineering》《Materials》等著名期刊发表论文10余篇。

本科生课程：

1、《工程图学》

2、《润滑与密封引论（双语）》

研究生课程：

1、《摩擦学及表面工程》

科研项目：

1.项目名称：耐高温高压高转速机械密封研究。参与，在研。

2.陕西省重要合作项目：JG-JD-2019003。参与，结题。

发表论文

[1]  Zhu D., Yang J. and Bai S., 2021. Thermoelastohydrodynamic Characteristics of Low-temperature Helium Gas T-groove Face seal. Materials. Vol. 14, pp. 2873.

[2]  Yang J., Fang Q., Kang G. and Zhou K.; Plastic deformation of a film-substrate with inhomogeneous inclusions under contact loading, Acta Mechanica, 2019, 230(4): 4463-4479.

[3]  Yang J., Wang X. and Zhou K.; A numerical elastic–plastic contact model for a half-space with inhomogeneous inclusions and cracks, Acta Mechanica, 2019, 230(4-5): 2233-2247.

[4]  Yang J., Fan Q., Zeng L., Keer L. M. and Zhou K., 2017. On the plastic zone sizes of cracks interacting with multiple inhomogeneous inclusions in an infinite space. Acta Mechanics. Vol. 1, pp. 1–18.

[5]   Yang J. and Zhou K., 2017. Analysis of the plastic zones of cracks in an elastic-perfectly plastic half-space under contact loading. International Journal of Mechanical Sciences. Vol. 121, pp. 143–150.

[6]   Yang J. and Zhou K., 2017. On elastic-plastic fracture behavior of a half-space under prescribed loading. International Journal of Applied Mechanics. 1750036.

[7]   Dong Q., Yang J., Wang X., Keer L. M. and Zhou K., 2015. Heterogeneous structures with inhomogeneous inclusions under elastohydrodynamic lubrication contact with consideration of surface roughness. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 1350650115606944.

[8]  Jiang J., Nie X., Wang Y. and Yang J., 2014. Microstructure and mechanical properties of AM50A magnesium alloy components prepared by die casting and double control forming. Advances in mechanical engineering. Vol. 6, pp. 450826.