程康杰

       程康杰，男，博士，朝晖特聘副研究员，硕士生导师。2020年毕业于浙江工业大学获工学博士学位，博士研究生期间在美国凯斯西储大学牙医学院交流学习一年，2022年于浙江工业大学动力工程及工程热物理流动站完成博士后研究工作。

       所在团队研究方向为数字化医学及医学3D打印、口腔种植机器人、医疗器械的智能设计及制造技术等；个人主要聚焦于医学图像处理与重建、医用高性能高分子材料测试、生物力学分析、人工植入体设计、3D打印及生物力学测试等。

       主持国家自然科学基金青年项目1项、浙江省自然科学基金探索项目1项、横向项目2项，参与多项国家自然科学基金面上项目、浙江省自然科学基金重大项目、横向项目。在Materials Science & Engineering C-Materials for Biological Applications、Computers in Biology and Medicine、Journal of the Mechanical Behavior of Biomedical Materials、International Journal for Numerical Methods in Biomedical Engineering、Rapid Prototyping Journal、Journal of Plastic, Reconstructive & Aesthetic Surgery等国际生物医学领域著名期刊发表SCI论文20余篇，授权发明专利4项。

纵向科研项目：

1. 血管化下颌骨植入体的仿骨再生微环境构建及促生长机制研究, 国家自然科学基金青年项目, 52305326, 2024.1-2026.12, 在研, 主持

2. 基于骨再生微环境多因素耦合机制的仿生血管化下颌骨植入体研究, 浙江省自然科学基金探索青年项目, LQ23E050016, 2023.1-2025.12, 在研, 主持

3. 口腔种植稳定性的多因素耦合机制及种植机器人操作参数自适应控制, 国家自然科学基金面上项目, 52175280, 2022.1-2025.12, 在研, 参与

4. 数字化技术引导下口腔复合缺损动物模型构建及PEKK仿生支架在该模型中的应用研究, 浙江省自然科学基金探索项目, LTGD23H140002, 2023.1-2025.12, 在研, 参与

5. 基于PEKK复合结构植入体的下颌骨缺损重建机理及其实现技术研究, 国家自然科学基金面上项目, 51775506, 2018.1-2021.12, 结题, 参与

6. 基于SLM技术的钛合金支架植入物在颌骨缺损修复和咬合功能重建中的研究, 浙江省自然科学基金, LY15H140007, 2015.1-2017.12, 结题, 参与

横向项目：

1. 复杂口腔环境下种植牙生物力学行为分析, 浙江省人民医院, 2023.8-2026.7, 在研, 主持

2. 保温杯全自动生产线运动仿真分析, 浙江哈尔斯真空器皿股份有限公司, 2022.5-2022.10, 在研, 主持

3. 向成人正畸的形状记忆高分子材料隐形矫治机理及矫治器研发, 浙江省盈盈数据智能研究院, 2021.8-2023.8, 在研, 参与

4. 个性化舌侧正畸矫治技术及系统研发, 浙江普特医疗器械有限公司, 2020.9-2022.9, 结题, 参与

5. 正畸生物力学分析及排牙系统开发, 杭州隐捷适生物科技有限公司, 2021.3-2022.2, 结题, 参与

6. 骨与软骨修复植入体设计分析, 浙江省人民医院, 2019.10-2021.10,  结题, 参与

7. 种植牙备孔过程中的骨骼温度场构建, 杭州六维齿科医疗技术有限公司, 2018.8-2018.12,  结题, 参与

出版专著：

1. 刘云峰, 程康杰, 仵健磊. 口腔医学数字化技术及应用 [M]. 北京: 中国轻工业出版, 2024.2.（中央级出版社）

发表论文：

1. K Cheng, Q Zhang, F Zhang, R Wang, Y Liu*. Biomechanical behavior of temporomandibular joint movements driven by mastication muscles [J]. International Journal for Numerical Methods in Biomedical Engineering, 2024.

2. L Xu, K Cheng*. Effect of thread design parameters on central screw loosening: a 3D finite element analysis [J]. Journal of Medical and Biological Engineering, 2024.

3. F Xiao*, J Ye, C Huang, J Dai, K Cheng, X Xu, L Deng, J You, Y Liu. Gradient gyroid Ti6Al4V scaffolds with TiO2 surface modification: Promising approach for large bone defect repair [J]. Biomaterials Advances, 2024, 161: 213899.

4. F Xiao*, C Huang, J Dai, J Ye, K Cheng, X Xu, L Deng, J You, W Wang, W Jin. In situ fabrication of NIR-II responsive TiO2 bio-metasurface for photothermal antibacterial and enhanced osseointegration [J]. Ceramics International, 2024, 50(16): 27689-27698.

5. X Sun^#, X Tang^#, K Cheng^#, Z Xia, Y Liu, F Yang*, L Wang*. Comparative biomechanics of all-on-4 and vertical implant placement in asymmetrical mandibular: a finite element study [J]. BMC Oral Health, 2024, 24(1): 425–434.

6. K Cheng, Z Shi, R Wang, X Jiang, F Xiao, Y Liu*. 3D printed PEKK bone analogs with internal porosity and surface modification for mandibular reconstruction: An in vivo rabbit model study [J]. Biomaterials Advances, 2023, 151: 213455.

7. S Ke^#, K Cheng^#, R Wang, X Jiang, Y Liu*. Experimental validation of a new model for mandibular motions [J]. International Journal for Numerical Methods in Biomedical Engineering, 2023, 39(7): e3716.

8. X Sun^#, K Cheng^#, Y Liu, S Ke, W Zhang, L Wang*, F Yang*. Biomechanical comparison of all-on-4 and all-on-5 implant-supported prostheses with alteration of anterior-posterior spread: A three-dimensional finite element analysis [J]. Frontiers in Bioengineering and Biotechnology, 2023,11: 1187504.  

9. 陈超, 刘云峰*, 徐加杰, 姜献峰, 郑传铭, 葛明华, 程康杰*. 基于二次曲面可展性的头颈部软组织缺损皮瓣精确修复方法[J]. 生物医学工程学杂志, 2023, 40(6): 1175-1184.  

10. K Cheng, Y Liu*, R Wang, Z Yuan, X Jiang, X Dong. Biomechanical behavior of mandible with posterior marginal resection using finite element analysis [J]. International Journal for Numerical Methods in Biomedical Engineering, 2022, 38(2): e3549.

11. K Cheng, Y Liu*, J H Wang, R Wang, J Xia, X Xu, X Jiang, X Dong. 3D-printed porous condylar prosthesis for temporomandibular joint replacement - Design and biomechanical analysis [J]. Technology and Health Care, 2022, 30(4): 1017–1030.

12. W Zhang^#, K Cheng^#, Y Liu, R Wang, Y Chen, Y Ding, F Yang*, L Wang*. Effect of the prosthetic index on stress distribution in Morse taper connection implant system and peri-implant bone: A 3D finite element analysis [J]. BMC Oral Health, 2022, 22: 431–441.    

13. T Kan, K Cheng, Y Liu*, R Wang, W Zhu, F Zhu*, X Jiang, X Dong. Evaluation of a custom-designed human-robot collaboration control system for dental implant robot [J]. International Journal of Medical Robotics and Computer Assisted Surgery, 2022, 18(1): e2346.

14. 彭伟, 徐良伟, 程康杰, 游嘉, 姚春燕*. 拟自然牙多根种植体的设计制造及评价 [J]. 中国生物医学工程学报, 2022, 41(1): 119–123.

15. K Cheng, T Kan, Y Liu*, W Zhu, F Zhu, W Wang, X Jiang, X Dong. Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An in-vitro study [J]. Computers in Biology and Medicine, 2021, 129: 104153.

16. C Xu^#, K Cheng^#, Y Liu*, R Wang, X Jiang, X Dong, X Xu. Effect of processing parameters on flexural properties of 3D-printed polyetherketoneketone using fused deposition modeling [J]. Polymer Engineering and Science, 2021, 61(2): 465–476.

17. X Xu^#, K Cheng^#, Y Liu*, Y Fan, J H Wang, R Wang, D A Baur, X Jiang, X Dong. Experimental validation of finite element simulation of a new custom - Designed fixation plate to treat mandibular angle fracture [J]. BioMedical Engineering OnLine, 2021, 20(1): 15–27.

18. W Peng, K Cheng, Y Liu*, M Nizza, D A Baur, X Jiang, X Dong. Biomechanical and mechanostat analysis of a titanium layered porous implant for mandibular reconstruction: The effect of the topology optimization design [J]. Materials Science & Engineering C-Materials for Biological Applications, 2021, 124: 112056.

19. K Cheng, Y Liu*, R Wang, J Zhang, X Jiang, X Dong, X Xu. Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 107: 103758.

20. K Cheng, Y Liu*, C Yao, W Zhao, X Xu*. A personalized mandibular implant with supporting and porous structures designed with topology optimization - A case study of canine [J]. Rapid Prototyping Journal, 2019, 25(2): 417–426.

21. K Cheng, Y Liu*, J H Wang, J C Jun, X Jiang, R Wang, D A Baur. Biomechanical behavior of mandibles reconstructed with fibular grafts at different vertical positions using finite element method [J]. Journal of Plastic Reconstructive and Aesthetic Surgery, 2019, 72(2): 281–289.

22. R Wang*, K Cheng, R C Advincula, Q Chen. On the thermal processing and mechanical properties of 3D-printed polyether ether ketone [J]. MRS Communications, 2019, 9(3): 1046–1052.

23. J Zhang*, H Liang, Y Zheng, D Wang, J Xia, W Peng, K Cheng, L Wang, Y Liu, W Peng, Q Li. Photodynamic therapy versus systemic antibiotic for the treatment of periodontitis in a rat model [J]. Journal of Periodontology, 2019, 90(7): 798–807.

授权专利：

1. 姚春燕, 张伟, 程康杰. 多段式通孔多孔牙种植体. CN201710144217.3. 2022-6-17授权.

2. 施振煜, 刘云峰, 程康杰. 一种具有自动外翻血管挂环功能的针环法血管吻合器. ZL202122482862.0. 2022-5-24授权.

3. 程康杰, 刘云峰, 姜献峰. 具有血管微循环通道和引导骨生长的下颌骨植入体. ZL202120508069.0. 2021-12-17授权.

4.  彭文明, 刘云峰, 程康杰. 一种考虑软组织附着和骨生长的下颌骨多孔植入体. ZL202021613115.5. 2021-02-26授权.

5. 袁子茜, 刘云峰, 程康杰. 用于下颌骨体箱状缺损修复的PEKK个性化植入体. ZL201921578641.X. 2020-08-18授权.

6. 王卫彬, 程康杰, 刘云峰. 基于主副机器人相互协作的颅面骨畸形整复全程精确手术系统. ZL201820241205.2. 2019-04-23授权.

7. 王卫彬, 刘云峰, 程康杰. 基于增强现实的人机协作机器人种牙系统. ZL201820065960.X. 2018-11-20授权.

8. 张伟, 张威, 程康杰. 新型多段式牙种植体.CN201720229603.8. 2018-08-31授权.

9. 张伟, 张威, 程康杰. 新型多孔牙种植体. CN201720229800.X. 2018-08-07授权.

10. 刘云峰, 程康杰, 范莹莹. 具有PEKK支撑固定单元与组织工程生长单元的下颌骨植入体制作方法及植入体. ZL201611257306.0. 2018-04-20授权.

本科生：《互换性和测量技术》

研究生：《先进制造技术》